Industrial Pump

Product Details:

RKB is a Multistage High Head Pump is having centrifugal side suction, vertical delivery, horizontal pump with diffuser type casing. Pump shaft is supported in anti-friction bearings. Enclosed impellers are of radial flow type provided with balancing holes. These pumps have standard lubrication of grease and are suitable for coupling with electric motors.

Features:

• This pump consists of a number of ring section diffuser casings bolted suction and delivery casing. Various models are available to operate at 1450 rpm and 2900 rpm at 50 Hz power supply frequency.

• Casing: Latest casing techniques ensure smoothness of hydralic passages resulting in high efficiency and reliability under hazardous conditions. The delivery flange is vertical. The suction flange can be oriented left or right viewed from driving end.

• Impeller: The enclosed impellers of the radial flow type are provided with balancing holes to balance the hydraulic axial thrust. The rotating elements are statically and dynamically balanced.

• Shaft:The high tensile steel shaft accurately machined and ground is supported by antifriction bearings that take the residual axial thrust and prevent axial float or radial run out.The shaft is protected by shaft sleeve from wear in stuffing box area.

• Stuffing Box: The stuffing box can be sealed by gland packing or by mechanical seal with minor modification. While pumping high temperature liquids from 90°C to 140°C, cooling jacket is provided for the stuffing box.

• Bearing: Standard lubrication is grease. For temperature above 90°C and up to 140°C - oil lubrication is required.

• Direction of Rotation: Standard - Clockwise viewed from driving end. Optional - Anticlockwise viewed from driving end.

• Drive: These pumps are suitable for coupling with electric motors, I C engines or steam turbine either directly or through belt drives.

 

Flanges:

 

Application:

• Fire-fighting
• Booster Service
• Mine Dewatering
• Boiler feed

Additional Information:

• Item Code: RKB

Product Details:

Our company is master in providing a wide assortment of Horizontal Split Case Pump to our clientele.

Product Details:

Due to the support of our authentic vendor base, we are able to present a huge array of End Suction Pump to the customers.

Product Details:

Other Details:

• Sand And Gravel Industrial Pump are designed for continuously handling the most difficult higher abrasive slurries, which contain too big solids, to be pumped by common pumps.
• They are suitable for delivering slurries in mining, explosive sludge in metal melting, dredging in dredger and course of rivers, and other fields.

Product Details:

Horizontal End Suction Centrifugal End Suction Pump for Clear Water Application in Ambient Temperature. 

Product Details:

Horizontal End Suction Centrifugal End Suction Pump for Clear Water Application in Ambient Temperature. 

Product Details:

We offer Grundfos Pump to our clients.
We, N.P. Syndicate, are offering a wide range of varieties in industrial and commercial products. We are doing this business for many years with extreme loyalty and honesty. We always put our customer's satisfaction in our top most prioity list.

Product Details:

Our firm is a leading name, involved in providing a comprehensive series of Kirloskar Water Pump. Presented range is immensely admired owing to their top performance and reasonable rates

Product Details:

We, N.P. Syndicate, are offering a wide range of varieties in industrial and commercial products. We are doing this business for many years with extreme loyalty and honesty. We always put our customer's satisfaction in our top most prioity list.

Product Details:

Other Details:

• Sand And Gravel Industrial Pump are designed for continuously handling the most difficult higher abrasive slurries, which contain too big solids, to be pumped by common pumps.
• They are suitable for delivering slurries in mining, explosive sludge in metal melting, dredging in dredger and course of rivers, and other fields.

Product Details:

Kirloskar CPBS Pressure Booster Pump are operating 180-240 voltage range - rated 220 volts, single phase supply. Widely used in water pressure boosting system, multi-jet shower panels, domestic utility water supply, vehicles normal washing, small fountains and kitchenware washing with water pressure.

Feature:

• Corrosion, erosion and rust-free water suitable for drinking
• In-built thermal overload protector
• Operating 180-240 voltage range - rated 220 volts, single phase supply
• SS impellers multistage pump generate less noise
• Pressure tank with world class MOC of diaphragm which give much more life at par with international level
• Most durable associates parts like Danfoss pressure switch, standard size of five way connector, NRV. SS Hose pipe, etc.

Application:

• Suitable for water pressure boosting system
• Multi-jet shower panels
• Domestic utility water supply
• Vehicles normal washing
• Small fountains
• Kitchenware washing with water pressure
• Washing machine/hot water geyser/gas geyser

Product Details:

Submersible Sewage Pump body of stainless steel, impeller is of Noryl, class of insulation F type and ingress protection IP68. This pump has thermal overload protector prevents burning due to overload condition.

Features:

• Automatic on-off feature-Pre-fitted float switch ensures that the pump is automatically switched on and off as per need
• Ready for use-no insulation required. Just drop it in the tank and you are ready to go
• Attractive stainless steel body, and other rust free parts
• Thermal overload protector prevents burning due to overload

Application:

• Removing stagnant water from basements/underground parking's/garages
• Draining accumulated storm water in monsoons
• Emptying water-tanks and pits for cleaning
• Waster water from kitchens, hotels, clubs
• Surplus water from sumps

 

 

Product Details:

As per the demands and requirements of our customers, we are providing them a wide array of Slurry Pump.

Product Details:

To attain maximum satisfaction of our customers, we are into presenting a personalized array of Kirloskar KV Vacuum Pump.
Kirloskar KV Vacuum Pump is having impeller of high quality bronze material and designed to prevent overloading and motor burning. These pumps widely used in water pressure boosting system, multi-jet shower panels, domestic utility water supply and vehicles normal washing.

Feature:

• Motor withstand wide voltage fluctuations
• Impeller of high quality bronze material
• Designed to prevent overloading and motor burning
• Models with B class insulation and IP-44 protection
• Dynamically balanced rotating parts ensure minimum vibrations

Applications:

• Priming of large pumps
• Evacuation of air from suction pips and chambers
• Specific applications : Twist drilling machine, removing water from pulp layer, labeling, bottle filling de-odorising
• General applications: Drying, evaporation, distillation, filtration, sterilsation, condensation, degasification.
• Extrusion machines
• Printing machines
• Confectionery machines

Additional Information:

• Port of Dispatch: Kolkata
• Delivery Time: Ready Stock

Product Details:

Other Details:

• Sand And Gravel Industrial Pump are designed for continuously handling the most difficult higher abrasive slurries, which contain too big solids, to be pumped by common pumps.
• They are suitable for delivering slurries in mining, explosive sludge in metal melting, dredging in dredger and course of rivers, and other fields.

Product Details:

We, N.P. Syndicate, are offering a wide range of varieties in industrial and commercial products. We are doing this business for many years with extreme loyalty and honesty. We always put our customer's satisfaction in our top most prioity list.

Product Details:

We are offering Mixed Flow Pump to our clients.

Constructional Features:

• These are end suction single stage, horizontal shaft, volute type pumps.
• Pump Casing: Horizontal/Vertical end suction high efficiency volute type with Top/side/45 degrees orientations. Delivery flange and supporting feet are cast integral with the casing.
  
• Impeller: Non clog - Semi open / Enclosed type and balanced dynamically. Hydraulically balanced by balancing holes / back vanes.
• Shaft: Made of high tensile steel, accurately grounded. Supported by deep groove ball bearings and thrust bearing housed in the bearing housing.
• Stuffing Box: Gland packed supply is standard for liquids having temperature upto 90°C Mechanical seal, can be supplied against request.
• Bearing: Deep groove ball bearing and thrust bearing. Standard lubrication - Oil (except MF 200 pump) MF 200 is with grease lubrication.
• Direction of Rotation: Clockwise viewed from driving end.
• Drive: Suitable for coupling with electric motors, I.C. Engines either directly or through belt drives/gear box.
• Flanges: Flanges shall be drilled as per BSEN 1092, PN 16 flat face except MF 17 1⁄2 - 20, MF 55-60, MF 60-65 pumps. For these models drilling will be BS 10 Table D

Application:

• Drainage
• Storm water
• Irrigation
• Air-conditioning

Product Details:

We are offering Mixed Flow Pump to our clients.

Constructional Features:

• These are end suction single stage, horizontal shaft, volute type pumps.
• Pump Casing: Horizontal/Vertical end suction high efficiency volute type with Top/side/45 degrees orientations. Delivery flange and supporting feet are cast integral with the casing.
  
• Impeller: Non clog - Semi open / Enclosed type and balanced dynamically. Hydraulically balanced by balancing holes / back vanes.
• Shaft: Made of high tensile steel, accurately grounded. Supported by deep groove ball bearings and thrust bearing housed in the bearing housing.
• Stuffing Box: Gland packed supply is standard for liquids having temperature upto 90°C Mechanical seal, can be supplied against request.
• Bearing: Deep groove ball bearing and thrust bearing. Standard lubrication - Oil (except MF 200 pump) MF 200 is with grease lubrication.
• Direction of Rotation: Clockwise viewed from driving end.
• Drive: Suitable for coupling with electric motors, I.C. Engines either directly or through belt drives/gear box.
• Flanges: Flanges shall be drilled as per BSEN 1092, PN 16 flat face except MF 17 1⁄2 - 20, MF 55-60, MF 60-65 pumps. For these models drilling will be BS 10 Table D

Application:

• Drainage
• Storm water
• Irrigation
• Air-conditioning

Additional Information:

• Item Code: MF

Product Details:

Product Details: